From single to full color, our high quality magnetic signs will give your business vehicles a removable alternative to permanent branding.

At Jackson Signs we combine high-quality materials with 20+ years of expert production, layout and design experience to offer you a "one-stop" solution for all of your magnetic vehicle display needs.

Let us create a professional sign that will accentuate your business and help you gain more exposure and sales!

Cleaning Signs.

• To guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications), remove the magnet at regular intervals.
• Clean both the magnet and metal surface with mild detergent; wipe with a soft cloth or allow to
  air-dry. (For vehicle-mounted signs, remove and clean weekly.)
• After waxing and polishing vehicle, allow 2 days for wax to cure before applying magnets

Storing Signs

• When not using signs, keep signs in a clean, dry place.
• Store signs totally flat to keep sign from comforming to anything its laid upon.
• Avoid placing objects (such as cartons) on top that could damage the face
• Do not stack with magnetic sides facing each other.

Applying Magnetic Signs

• Make sure the entire magnet is flat against the metal surface. Do not place over protrusions (molding,decals, etc.) or concave areas. There must be NO air pockets.
• The magnet itself should be at a room temperature of 60°F (16°C) or above when installed to achieve best results.
• Do not apply magnet that has been curled with the magnet side out. The magnet may not attach properly to the metallic surface resulting in lifted corners or air gaps which will weaken its holding strength. Follow instructions for Storing Flexible Magnet.
• If you place the magnet in the wrong position, completely remove the magnet from the surface and reaffix. Lift at sides and not at corners to remove. Do not pull the magnet sign across the surface, or it may stretch due to the resistance caused by the high magnetic strength.
• Do NOT use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods), temperatures exceeding 160ºF (71ºC) or temperatures below -15ºF (-26ºC).
• Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles) can result in uneven fading of the surface because the magnet-covered area is shielded from ultraviolet rays.

NOTE: Doors and panels on some vehicles are not made of steel. Magnetic signs will not work on aluminum and plastic surfaces.